Magnum MS2012 Inverter/Charger, 2000W/100A for Wind Generator, Solar Panel, RV

Description

Magnum MS2012 Inverter/Charger, 2000W/100A for Wind Generator, Solar Panel, RV
Magnum MS2012 Inverter/Charger, 2000W/100A
The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use.
Features:
You asked and Magnum listened.
The MS Series Inverter/Charger is loaded with features:
Pure sine wave:
Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choices:
The MS Series comes in four power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
Lightweight:
The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports:
The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design:
The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches:
The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay:
50 Amp transfer service is available on all models.
Buy with ease:
The MS Series is backed by a three-year (36-month) limited warranty.
Accessories and Options
Remote control
(sold
separate
)
:
For convenient finger-tip operation, including the new one-knob™ programming.
AGS module (sold
separate
) :
Automatically starts and stops your generator based on temperature or battery voltage.
Specifications:
Output Power: 2,000W
Peak Watts: 3,300W
Warranty: Three years parts and labor
Output Voltage: 120 VAC
Output Peak: 50 Amps
Output Current: 33 Amps
Output Waveform: Pure Sine
Output Frequency: 60 Hz
Input Voltage: 12
Continuous Output Amps: 33 Amps
Operating Temp: -20° C to +60° C (-4° F to 140° F)
Efficiency: 90.6%
Weight: 42 lb (19.1 kg)
Dimensions: 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
UL Certified: Yes
Phase: Single
Topology: Low Frequency
Input Battery Voltage Range: 9-16.8
Features:
Pure Sine Wave
12, 24 and 48V configurations
Versatile Mounting
Lightweight
Multiple Comm Ports
Expanded Transfer Relay
Options:
Remote Panel (sold separate): ME-ARC, ME-RC
Charger Type: Bulk, Absorb, Float, Equalize (requires remote), and Battery SaverTM
Input Current: 15 Amps AC
Output Current: 100 ADC
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Magnum MS2012 Inverter/Charger, 2000W/100A The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications. The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use. Features You asked and Magnum listened. The MS Series Inverter/Charger is loaded with features: Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS Series comes in four power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you. Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. Expanded transfer relay: 50 Amp transfer service is available on all models. Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty. Accessories and Options Remote control: For convenient finger-tip operation, including the new one-knob™ programming. AGS module: Automatically starts and stops your generator based on temperature or battery voltage. Specifications Model MS2000 * MS2012 ** MS2812 MS4024 Inverter Specifications Input Battery Voltage 9 - 17 VDC 9 - 17 VDC 9 - 17 VDC 18 - 34 VDC Nominal AC output voltage 120 VAC 120 VAC 120 VAC 120 VAC Output frequency and accuracy 60Hz ± 0.005% 60Hz ± 0.005% 60Hz ± 0.005% 60Hz ± 0.005% Total Harmonic Distortion (THD) < 5% < 5% < 5% < 5% 1 msec surge current (amps AC) 50 50 70 120 100 msec surge current (amps AC) 33 33 40 72 5 sec surge power (real watts) 3300 3300 3900 5800 30 sec surge power (real watts) 3100 3100 3800 5400 5 min surge power (real watts) 2800 2800 3200 4900 30 min surge power (real watts) 2200 2200 3000 4500 Continuous power output at 25ºC 2000 VA 2000 VA 2800 VA 4000 VA Rated input battery current 225 ADC 225 ADC 267 ADC 204 ADC Inverter efficiency 89% 89% 88% 87% Transfer time 16 msecs 16 msecs 16 msecs 16 msecs Search Mode 0.3 ADC 0.3 ADC 0.3 ADC 0.3 ADC No Load (120 VAC output with remote) 2 ADC 2 ADC 2 ADC 0.6 ADC Waveform Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave Charger Specifications Continuous Output at at 25 ºC 100 ADC 100 ADC 125 ADC 105 ADC Charger efficiency 85% 85% 85% 85% Power factor > 0.95 > 0.95 > 0.95 > 0.95 Input current at rated output (AC amps) 15 15 18 29 General Features and Capabilities Transfer relay capability MS2000: 30 A single input MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability Bulk, Absorb, Float, Equalize, and Battery Saver Battery temperature compensation With available temp sensor (battery temp 0 - 50 ºC) Remote inverter on/off switch With available pigtail to connect to dry contact Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes on transformer, MOSFETS, and battery Conformal coating on PCB's for corrosion protection Yes Powder coated chassis & top for corrosion protection Yes Stainless steel fasteners for corrosion protection Yes Dual AC branch rated output breakers Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings Listings ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty Three years Environmental Specifications Operating temperature -20 ºC to + 60 ºC (-4 ºF to 140 ºF) Nonoperating Temperature -40 ºC to + 70 ºC (-40 ºF to 158 ºF) Operating Humidity 0 to 95% RH non-condensing Physical Specifications Dimensions (l x w x h) 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Weight 43 lb (19.5 kg) 43 lb (19.5 kg) 53 lb (24.0 kg) 58 lb (26.3 kg) Max operating altitude 15,000' (4570 m)
Magnum MS2012 Inverter/Charger, 2000W/100A for Wind Generator, Solar Panel, RV
Magnum MS2012 Inverter/Charger, 2000W/100A
The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use.
Features
You asked and Magnum listened.
The MS Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choices: The MS Series comes in four power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 50 Amp transfer service is available on all models.
Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.
Accessories and Options
Remote control: For convenient finger-tip operation, including the new one-knob™ programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Specifications
Model
MS2000 *
MS2012 **
MS2812
MS4024
Inverter Specifications
Input Battery Voltage
9 - 17 VDC
9 - 17 VDC
9 - 17 VDC
18 - 34 VDC
Nominal AC output voltage
120 VAC
120 VAC
120 VAC
120 VAC
Output frequency and accuracy
60Hz ± 0.005%
60Hz ± 0.005%
60Hz ± 0.005%
60Hz ± 0.005%
Total Harmonic Distortion (THD)
< 5%
< 5%
< 5%
< 5%
1 msec surge current (amps AC)
50
50
70
120
100 msec surge current (amps AC)
33
33
40
72
5 sec surge power (real watts)
3300
3300
3900
5800
30 sec surge power (real watts)
3100
3100
3800
5400
5 min surge power (real watts)
2800
2800
3200
4900
30 min surge power (real watts)
2200
2200
3000
4500
Continuous power output at 25ºC
2000 VA
2000 VA
2800 VA
4000 VA
Rated input battery current
225 ADC
225 ADC
267 ADC
204 ADC
Inverter efficiency
89%
89%
88%
87%
Transfer time
16 msecs
16 msecs
16 msecs
16 msecs
Search Mode
0.3 ADC
0.3 ADC
0.3 ADC
0.3 ADC
No Load (120 VAC output with remote)
2 ADC
2 ADC
2 ADC
0.6 ADC
Waveform
Pure Sine Wave
Pure Sine Wave
Pure Sine Wave
Pure Sine Wave
Charger Specifications
Continuous Output at at 25 ºC
100 ADC
100 ADC
125 ADC
105 ADC
Charger efficiency
85%
85%
85%
85%
Power factor
> 0.95
> 0.95
> 0.95
> 0.95
Input current at rated output (AC amps)
15
15
18
29
General Features and Capabilities
Transfer relay capability
MS2000: 30 A single input
MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability
Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation
With available temp sensor (battery temp 0 - 50 ºC)
Remote inverter on/off switch
With available pigtail to connect to dry contact
Internal cooling
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
Yes, with two overlapping circuits
Overtemperature protection
Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection
Yes
Powder coated chassis & top for corrosion protection
Yes
Stainless steel fasteners for corrosion protection
Yes
Dual AC branch rated output breakers
Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings
Listings
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Warranty
Three years
Environmental Specifications
Operating temperature
-20 ºC to + 60 ºC (-4 ºF to 140 ºF)
Nonoperating Temperature
-40 ºC to + 70 ºC (-40 ºF to 158 ºF)
Operating Humidity
0 to 95% RH non-condensing
Physical Specifications
Dimensions (l x w x h)
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
Mounting
Shelf (top or bottom up) or bulkhead (vents up)
Weight
43 lb (19.5 kg)
43 lb (19.5 kg)
53 lb (24.0 kg)
58 lb (26.3 kg)
Max operating altitude
15,000' (4570 m)
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Magnum MS2012 Inverter/Charger, 2000W/100A
The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use.
Features
You asked and Magnum listened.
The MS Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choices: The MS Series comes in four power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 50 Amp transfer service is available on all models.
Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.
Accessories and Options
Remote control: For convenient finger-tip operation, including the new one-knob™ programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Specifications
Model
MS2000 *
MS2012 **
MS2812
MS4024
Inverter Specifications
Input Battery Voltage
9 - 17 VDC
9 - 17 VDC
9 - 17 VDC
18 - 34 VDC
Nominal AC output voltage
120 VAC
120 VAC
120 VAC
120 VAC
Output frequency and accuracy
60Hz ± 0.005%
60Hz ± 0.005%
60Hz ± 0.005%
60Hz ± 0.005%
Total Harmonic Distortion (THD)
< 5%
< 5%
< 5%
< 5%
1 msec surge current (amps AC)
50
50
70
120
100 msec surge current (amps AC)
33
33
40
72
5 sec surge power (real watts)
3300
3300
3900
5800
30 sec surge power (real watts)
3100
3100
3800
5400
5 min surge power (real watts)
2800
2800
3200
4900
30 min surge power (real watts)
2200
2200
3000
4500
Continuous power output at 25ºC
2000 VA
2000 VA
2800 VA
4000 VA
Rated input battery current
225 ADC
225 ADC
267 ADC
204 ADC
Inverter efficiency
89%
89%
88%
87%
Transfer time
16 msecs
16 msecs
16 msecs
16 msecs
Search Mode
0.3 ADC
0.3 ADC
0.3 ADC
0.3 ADC
No Load (120 VAC output with remote)
2 ADC
2 ADC
2 ADC
0.6 ADC
Waveform
Pure Sine Wave
Pure Sine Wave
Pure Sine Wave
Pure Sine Wave
Charger Specifications
Continuous Output at at 25 ºC
100 ADC
100 ADC
125 ADC
105 ADC
Charger efficiency
85%
85%
85%
85%
Power factor
> 0.95
> 0.95
> 0.95
> 0.95
Input current at rated output (AC amps)
15
15
18
29
General Features and Capabilities
Transfer relay capability
MS2000: 30 A single input
MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability
Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation
With available temp sensor (battery temp 0 - 50 ºC)
Remote inverter on/off switch
With available pigtail to connect to dry contact
Internal cooling
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
Yes, with two overlapping circuits
Overtemperature protection
Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection
Yes
Powder coated chassis & top for corrosion protection
Yes
Stainless steel fasteners for corrosion protection
Yes
Dual AC branch rated output breakers
Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings
Listings
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Warranty
Three years
Environmental Specifications
Operating temperature
-20 ºC to + 60 ºC (-4 ºF to 140 ºF)
Nonoperating Temperature
-40 ºC to + 70 ºC (-40 ºF to 158 ºF)
Operating Humidity
0 to 95% RH non-condensing
Physical Specifications
Dimensions (l x w x h)
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
Mounting
Shelf (top or bottom up) or bulkhead (vents up)
Weight
43 lb (19.5 kg)
43 lb (19.5 kg)
53 lb (24.0 kg)
58 lb (26.3 kg)
Max operating altitude
15,000' (4570 m)